Direct TV Receiver DR25 Manual

The Direct TV Receiver DR25 is a satellite TV receiver with high-definition capabilities, built-in DVR functionality, HDMI output, USB ports for external storage, Ethernet connectivity, Dolby Digital audio support, parental controls, program guide, and remote control access. Powered by 120V AC, 60Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Recording and Playback 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Satellite receiver with DVR, Remote Control, HDMI output, USB ports, Ethernet port, Satellite input, Optical audio output.

Feature	Description
Satellite input	For satellite dish connection
HDMI output	For high-definition video and audio to TV
USB ports	For external storage and media playback
Ethernet port	For internet connectivity
Optical audio output	For digital audio to sound systems
AC input connector	For power connection
Component video output	For analog HD video connection
POWER	Turns receiver on/off
MENU	Accesses main menu system
GUIDE	Displays program guide

Installation

Unpack and inspect contents. Place on stable surface near TV.

Connect satellite dish: Run coaxial cable from dish to satellite input on receiver.
Connect to TV: Use HDMI cable for best quality or component video cables.
Connect audio: Use optical cable for surround sound systems.
Connect to internet: Use Ethernet cable for on-demand content.
Plug into AC power.

WARNING! Ensure all connections are secure before powering on. Use surge protector for power connection.

First-Time Setup

Power on receiver; follow on-screen prompts.

Satellite setup: Run satellite signal test to ensure proper alignment.
Network setup: Configure internet connection for on-demand services.
Program guide download: Allow receiver to download current program information.
Parental controls: Set up PIN (default 0000) for content restrictions.
Audio/video settings: Configure output resolution and audio format.

CAUTION! Do not disconnect power during initial setup process.

Specifications

Video Output: HDMI, Component, Composite
Audio Output: Optical, HDMI, Analog stereo
Storage: 500GB internal hard drive
Connectivity: Ethernet, USB 2.0
Recording: Simultaneous record and playback
Supported formats: MPEG-2, MPEG-4, H.264
Power Source: 120V AC, 60Hz
Operating Temp: 32°F to 104°F (0°C to 40°C)

Controls and Settings

Access menu system via MENU button. Front Panel: POWER, CHANNEL, VOLUME, SELECT.

Remote: POWER, Numeric buttons, GUIDE, MENU, INFO, DVR, EXIT, directional pad, SELECT.

Settings: Display (resolution, aspect ratio), Audio (digital output, volume control), Parental (ratings, PIN), System (network, satellite setup), DVR (storage management, series recording).

Connecting Devices

Satellite: Coaxial input. TV: HDMI or component. Audio: Optical or HDMI. Network: Ethernet.

Turn off all devices before connecting.
Use high-quality HDMI cables for best performance.
Connect Ethernet cable for software updates and on-demand.
Connect USB storage for additional recording capacity.

Tip: Label cables for easy identification during troubleshooting.

Recording and Playback

Supports single program and series recording.

Record program: Press RECORD button or schedule from guide.
Series recording: Set up from program info screen.
Playback: Access recorded programs from DVR menu.
Pause live TV: Press PAUSE during playback.
Skip: Use skip forward/back buttons during playback.
Manage recordings: Delete or prioritize from DVR manager.
External storage: Format USB drive for additional storage.

WARNING! Do not disconnect power during recording. Allow proper ventilation around unit.

Accessibility Features

Closed Captions: Enable in menu system (digital and analog). Audio Description: For visually impaired when available. Parental Controls: Block by rating, channel, or program type.

Care & Cleaning

Unplug before cleaning. Use soft, dry cloth only; no liquids or chemical cleaners.

CAUTION! Keep unit dry and away from heat sources. Ensure proper ventilation around unit.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2025 Direct TV; all rights reserved. For technical support, visit www.directv.com/support or contact 1-800-531-5000.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No satellite signal	Dish alignment/connections	Check dish alignment; ensure cables connected securely; run signal test.
Recording failed	Storage space/timer conflict	Check available storage; ensure no timer conflicts; reboot receiver.
Remote not working	Batteries/obstructions	Replace batteries; ensure clear line of sight to receiver.
No video/audio	Cables/settings	Check HDMI/component connections; verify TV input selection; check audio settings.
Guide not updating	Satellite signal/internet	Ensure strong satellite signal; check internet connection; force guide update.

Reset: Menu > Settings > System > Reset to Factory Defaults

Service: 1-800-531-5000; www.directv.com/support