Direct TV User Manual TV Codes

The Direct TV remote control system requires specific codes to program your television for optimal functionality. These codes allow seamless integration between your Direct TV remote and TV, enabling control of power, volume, input selection, and other essential functions. Below are comprehensive sections covering code programming, troubleshooting, code lists by brand, and setup instructions.

1. Remote Control Programming 2. TV Code Lists by Brand 3. Auto Code Search Method 4. Manual Code Entry 5. Troubleshooting Code Issues 6. Remote Control Functions 7. Code Reset Procedures 8. Universal Remote Setup 9. Advanced Programming 10. Support and Resources

Remote Control Programming

Programming your Direct TV remote requires specific codes matched to your TV brand and model.

Step	Procedure
1	Turn on your television
2	Press and hold MUTE and SELECT buttons simultaneously until green light flashes twice
3	Enter 5-digit code for your TV brand
4	Press POWER to test - TV should turn off if code is correct
5	Press SELECT to save the code

TV Code Lists by Brand

Common TV codes for popular television brands.

Brand	Code 1	Code 2	Code 3
Samsung	11756	11758	11761
Sony	10001	10005	10007
LG	10456	10458	10461
Vizio	11781	11783	11785
TCL	11771	11773	11775
Panasonic	10171	10173	10175

Auto Code Search Method

Use auto search when specific codes are unknown.

Turn on TV and point remote at television
Press and hold MUTE and SELECT until green light flashes twice
Press CHANNEL UP repeatedly until TV turns off
Press SELECT to save the code
Test volume and power functions

NOTE: Auto search may take several minutes; be patient during process.

Manual Code Entry

For precise code programming using known codes.

Step 1: Turn on television
Step 2: Press and hold MUTE and SELECT simultaneously
Step 3: Enter 5-digit code for your TV brand
Step 4: Press POWER to test functionality
Step 5: Press SELECT to save successful code

Troubleshooting Code Issues

Common problems and solutions for TV code programming.

Problem	Cause	Solution
Code not working	Incorrect code entry	Try alternative codes for your brand
Partial functionality	Code mismatch	Use auto search method
Remote not responding	Batteries/obstructions	Replace batteries; clear line of sight
TV won't turn off	Wrong code type	Reset remote and restart process

Remote Control Functions

Key buttons and their functions after successful programming.

Primary Controls: POWER, VOLUME UP/DOWN, MUTE, CHANNEL UP/DOWN, INPUT SELECT, MENU, GUIDE, INFO.

Advanced Functions: Programming mode activation, code entry, device control switching, factory reset.

Code Reset Procedures

Reset remote to factory settings if codes are corrupted.

Press and hold MUTE and SELECT for 5 seconds
Wait for green light to flash four times
Release buttons - remote is now reset
Begin programming process from start

WARNING: Reset erases all programmed codes and settings.

Universal Remote Setup

Additional setup for universal remote functionality.

Device Selection: TV, AUDIO, DVD, AUX
Mode Buttons: Press corresponding device button before programming
Multi-device Control: Program separate codes for each device type
Code Verification: Test each device after programming

Advanced Programming

Advanced features and custom programming options.

Macro Programming: Create sequences of commands for single-button operation. Learning Function: Program remote to learn commands from original remotes. Key Mapping: Customize button functions for specific needs.

Support and Resources

For additional assistance with TV codes and programming.

Online Code Database: Visit directv.com/codes for updated code lists. Customer Support: 1-800-531-5000 for live assistance. Manual Downloads: Available at directv.com/support. Code Updates: Regular updates for new TV models.