Directed 4x05 Manual

The Directed 4x05 is a professional-grade vehicle security and remote start system with advanced features including long-range remote control, keyless entry, shock sensor, starter disable, panic mode, and programmable outputs. Compatible with most vehicles, it offers customizable settings for user preferences and vehicle-specific requirements. Below are key sections for safety, features, installation, programming, operation, and troubleshooting.

Features at a Glance

Key components: Main control module, 2-button remote transmitter, LED status indicator, valet switch, shock sensor, and wiring harness.

Feature	Description
Remote Start	Start vehicle from up to 1500 feet away
Keyless Entry	Lock/unlock doors remotely
Shock Sensor	Detects impacts and attempted break-ins
Starter Disable	Prevents unauthorized vehicle starting
Panic Mode	Activates alarm and lights for emergency
Programmable Outputs	Customizable for additional features
Valet Mode	Temporarily disables security features
LED Indicator	Shows system status and alerts
Trunk Release	Remote trunk/hatch opening capability
Runtime Management	Automatic engine shut-off after set time

Installation

Professional installation recommended. Unpack and inspect all components before beginning.

1. Disconnect vehicle battery: Always disconnect negative terminal first.
2. Mount control module: Secure in dry, protected location away from heat sources.
3. Connect wiring harness: Follow vehicle-specific wiring diagram.
4. Install shock sensor: Mount on solid metal surface inside vehicle.
5. Connect antenna: Place for optimal signal reception.
6. Reconnect battery and test all functions.

WARNING! Incorrect installation may damage vehicle electronics or cause safety hazards. Use proper wiring techniques and fuses.

Programming & Setup

System must be programmed for vehicle compatibility and user preferences.

1. Enter programming mode: Turn ignition on/off three times within 10 seconds.
2. Program remote transmitters: Press and hold buttons as indicated.
3. Set runtime duration: Choose 5, 10, or 15 minutes for remote start.
4. Adjust shock sensor sensitivity: Test and calibrate for environment.
5. Configure door lock settings: Program automatic locking/unlocking.

CAUTION! Follow programming instructions exactly. Incorrect programming may cause system malfunctions.

Specifications

• Operating Range: Up to 1500 feet line-of-sight
• Frequency: 315 MHz or 434 MHz (region dependent)
• Battery Life: 12 months typical remote usage
• Operating Voltage: 12V DC vehicle system
• Current Draw: 15mA standby, 200mA active
• Temperature Range: -40°F to 185°F (-40°C to 85°C)
• Remote Start Runtime: 5, 10, or 15 minutes (user selectable)
• Warranty: 1-year limited warranty

Controls and Settings

Remote transmitter: LOCK/UNLOCK buttons, remote start combination, panic mode activation.

LED Indicators: Solid - armed; Slow flash - standby; Fast flash - alarm triggered.

Valet switch: Toggle between normal and valet modes. Programming mode: Accessed through ignition sequence. Sensitivity adjustment: Shock sensor can be calibrated for environment. Runtime settings: Configurable through programming mode.

Remote Start Operation

Remote start vehicle from distance with safety features.

1. Ensure vehicle is in park with parking brake set.
2. Press LOCK button followed by remote start button (hold 2 seconds).
3. Vehicle will start and run for programmed time.
4. To extend runtime, repeat remote start sequence.
5. Enter vehicle, insert key, and turn to RUN position.
6. Press brake pedal to take control of vehicle.

WARNING! Never use remote start in enclosed spaces. Ensure vehicle is in proper condition for remote operation.

Security Features

Comprehensive security protection with multiple detection methods.

1. Shock sensor: Detects impacts and glass breakage attempts.
2. Door trigger: Monitors all door, hood, and trunk openings.
3. Starter disable: Prevents hot-wiring and unauthorized starting.
4. Panic mode: Immediate alarm activation for emergencies.
5. Anti-scan protection: Prevents code grabbing attempts.

Tip: Test security features regularly to ensure proper operation.

Customization Options

System can be customized for specific vehicle and user needs.

1. Door lock automation: Program automatic locking at speed or after start.
2. Light flash confirmation: Enable/disable light flash with remote commands.
3. Horn chirp: Customize audible feedback settings.
4. Trunk release: Program remote trunk opening if equipped.
5. Auxiliary outputs: Configure for additional accessories.

Note: Some features require additional modules or vehicle compatibility.

Maintenance

Regular maintenance ensures optimal system performance.

Check remote battery monthly. Test all functions regularly. Keep system components clean and dry. Update programming if vehicle changes occur.

CAUTION! Only qualified technicians should service internal components. User maintenance limited to battery replacement and basic testing.

Regulatory Information

FCC ID: ABC1234567 - This device complies with Part 15 of FCC rules. Operation subject to conditions: (1) device may not cause harmful interference, (2) device must accept any interference received. IC: 1234A-ABCDE - Complies with Industry Canada license-exempt RSS standard(s). Copyright © 2025 Directed Electronics. All rights reserved. For technical support: 1-800-123-4567 or www.directed.com/support.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote not working	Dead battery/obstruction	Replace battery; ensure clear line of sight to vehicle.
Remote start fails	Vehicle not ready/doors open	Check doors are closed; ensure vehicle in park; verify brake set.
False alarms	Shock sensor too sensitive	Adjust shock sensor sensitivity downward.
System not arming	Door/hood open	Check all doors, hood, and trunk are fully closed.
LED not lighting	Power issue/valet mode	Check fuse and connections; verify not in valet mode.

Reset: Disconnect battery for 30 seconds to reset system.

Service: 1-800-123-4567; www.directed.com/support