Directed 5103 Manual

The Directed 5103 is a professional-grade vehicle security and remote start system with advanced two-way communication, long-range operation, LCD remote display, shock sensor, and multiple security zones. Features include remote start with runtime adjustment, keyless entry, panic mode, trunk release, and programmable outputs. Compatible with most vehicles, it offers comprehensive security monitoring and user customization. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Two-way LCD remote, Control module, Shock sensor, LED status indicator, Valet switch, Programming button.

Feature	Description
Two-way communication	Remote confirms commands and alerts
LCD remote display	Shows system status and notifications
Remote start	Starts vehicle from distance with adjustable runtime
Shock sensor	Detects impacts and vibration
Keyless entry	Remote door lock/unlock
Panic mode	Activates alarm for emergency situations
Trunk release	Remote trunk opening
Programmable outputs	Customizable auxiliary functions
Valet mode	Temporarily disables security features
Multiple security zones	Separate warning levels for different triggers

Installation

Unpack and inspect contents. Professional installation recommended.

1. Mount control module: Secure in dry, protected area under dashboard.
2. Connect wiring: Follow vehicle-specific wiring diagram for power, ignition, and data connections.
3. Install shock sensor: Mount on solid surface away from direct vibration sources.
4. Connect antenna: Position for optimal signal reception.
5. Test all functions: Verify remote start, security, and accessory operations.

WARNING! Disconnect vehicle battery before installation. Professional installation required for proper operation and warranty.

First-Time Setup

Power on system; follow programming procedures.

1. Enter programming mode: Press and hold valet button until LED flashes.
2. Set remote start options: Configure runtime, temperature settings, and safety features.
3. Program remotes: Add or remove remotes from system memory.
4. Adjust shock sensor: Set sensitivity level for your environment.
5. Configure security features: Set alarm triggers and response levels.

CAUTION! Test all functions in safe environment before regular use.

Specifications

• Operating Range: Up to 1/4 mile (400m) depending on environment
• Remote Type: Two-way LCD with vibration alerts
• Security Zones: 3 programmable zones with separate sensitivity
• Remote Start Runtime: 5-60 minutes adjustable
• Compatibility: Most gasoline vehicles with automatic transmission
• Power Requirements: 12V DC vehicle electrical system
• Operating Temperature: -40°F to 185°F (-40°C to 85°C)
• Frequency: 315 MHz or 434 MHz depending on model

Controls and Settings

Access programming via valet switch and remote buttons. Remote: LOCK, UNLOCK, REMOTE START, PANIC, TRUNK, AUX.

Remote Functions: Power, Lock/Unlock, Remote Start, Panic, Trunk Release, Auxiliary controls.

Programming: Enter programming mode with valet switch, use remote buttons to select options. Security: Adjust shock sensor sensitivity, set alarm triggers, configure response patterns. Remote Start: Set runtime duration, temperature settings, safety checks. Customization: Program auxiliary outputs, set horn honk patterns, configure LED flash rates.

Connecting Devices

Control module: Main unit connections. Shock sensor: Impact detection. Remote: Two-way communication.

1. Disconnect vehicle battery before connecting any components.
2. Follow wiring diagram for vehicle-specific connections.
3. Connect antenna for optimal range and performance.
4. Test all connections before final installation.

Tip: Use proper wire connectors and routing to prevent interference and damage.

Remote Start Operation

Supports remote engine start with safety features.

1. Activate remote start: Press REMOTE START button twice on remote.
2. Monitor status: LCD remote shows engine status and runtime remaining.
3. Extend runtime: Press REMOTE START during operation to add time.
4. Cancel remote start: Press REMOTE START button once to shut down.
5. Safety features: System checks for hood open, brake pressed, and proper gear selection.
6. Temperature control: Set desired cabin temperature for automatic climate control.

WARNING! Never use remote start in enclosed spaces. Ensure vehicle is in park with parking brake engaged.

Security Features

Shock Sensor: Adjustable sensitivity for impact detection. Panic Mode: Hold panic button for 2 seconds. Valet Mode: Disable security features temporarily.

Care & Maintenance

Keep remote dry and away from extreme temperatures. Replace remote batteries annually or when low battery indicator appears.

CAUTION! Do not expose components to moisture or extreme heat. Regular system checks recommended.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. This device complies with part 15 of the FCC Rules. Copyright © Directed Electronics; all rights reserved. For technical support, visit www.directed.com or contact 1-800-876-0800.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote not working	Dead batteries/range	Replace batteries; check operating range; reprogram remote.
Remote start fails	Safety triggers/transmission	Check hood pin, brake switch, transmission position.
False alarms	Shock sensor sensitivity	Adjust shock sensor sensitivity; check mounting.
No response to commands	Programming/connections	Re-enter programming mode; check control module connections.
Limited range	Antenna/batteries	Check antenna connection; replace remote batteries.

Reset: Disconnect battery for 30 seconds to reset system.

Service: 1-800-876-0800; www.directed.com