Directed 5x10 Manual

The Directed 5x10 is a high-performance audio amplifier system designed for professional and home audio applications. Featuring 5-channel amplification with 10-inch subwoofer integration, this system delivers powerful, clear audio across multiple frequency ranges. Below are key sections covering safety guidelines, technical specifications, installation procedures, operation instructions, and troubleshooting.

Features at a Glance

Key components: 5-channel amplifier, 10-inch subwoofer, Remote Control, Multiple audio inputs, Speaker outputs, Power connector.

Feature	Description
Power Input	For AC power connection
Audio Input Ports	RCA and digital optical inputs
Speaker Outputs	For 5.1 channel speaker system
Subwoofer Output	Dedicated 10-inch subwoofer connection
Remote Sensor	For remote control operation
Display Panel	LED display for status and settings
POWER	Turns system on/off
VOLUME	Adjusts audio output level
MODE	Selects operation modes
INPUT	Selects audio input source

Installation

Unpack and inspect all components. Place on stable, level surface.

1. Connect power: Use provided power cable to AC outlet.
2. Connect audio sources: Use RCA or optical cables to connect audio devices.
3. Connect speakers: Attach speaker wires to appropriate terminals.
4. Position subwoofer: Place in optimal location for bass response.

WARNING! Ensure proper ventilation; do not block cooling vents. Use appropriate gauge speaker wire.

First-Time Setup

Power on system; follow initialization procedure.

1. Speaker configuration: Use auto-calibration or manual setup.
2. Input selection: Configure audio inputs for connected devices.
3. Sound calibration: Run room correction for optimal audio.
4. Remote pairing: Sync remote control if required.

CAUTION! Ensure all connections are secure before powering on.

Specifications

• Amplifier Type: 5-channel Class D
• Power Output: 100W per channel (RMS)
• Subwoofer: 10-inch powered woofer
• Frequency Response: 20Hz - 20kHz
• Inputs: RCA, Optical, Coaxial
• Outputs: Speaker terminals, Subwoofer out
• Power Requirements: 120V AC, 60Hz
• Dimensions: Standard component size
• Weight: 15.4 lbs (amplifier), 25.1 lbs (subwoofer)

Controls and Settings

Front Panel: POWER, VOLUME, INPUT SELECT, MODE. Remote Control: All front panel functions plus additional features.

Audio Settings: Bass, Treble, Balance, Fader, Crossover. System Settings: Auto standby, Display brightness, Input naming. Advanced: Room correction, Speaker distance, Level calibration.

Connecting Devices

Audio Sources: DVD players, gaming consoles, streaming devices, computers.

1. Turn off all devices before connecting.
2. Use appropriate cables for each source.
3. Connect speakers observing polarity.
4. Power on devices in sequence.

Tip: Use high-quality cables for best audio performance.

Operation Modes

Multiple listening modes for different content types.

1. Stereo: Traditional 2-channel audio
2. Surround: 5.1 channel processing
3. Direct: Pure audio path
4. Night: Compressed dynamic range
5. Music: Optimized for music content
6. Movie: Enhanced surround effects

Note: Mode selection affects audio processing and speaker output.

Advanced Features

Room Correction: Automatic speaker calibration. Network Control: App-based system management. Multi-room: Zone 2 output for second room. Firmware Updates: USB update capability.

Care & Maintenance

Keep unit clean and dust-free. Use soft, dry cloth for cleaning. Ensure adequate ventilation. Check connections periodically.

CAUTION! Do not use liquid cleaners. Avoid moisture exposure.

Regulatory Information

FCC Part 15 compliant. CE certified. RoHS compliant. Copyright © 2025 Directed Audio Systems. For support, visit www.directedsystems.com or contact 1-800-555-1234.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cable/outlet	Check power connection; try different outlet.
No sound	Input selection/volume	Verify input source; check volume level; ensure mute off.
Distorted audio	Speaker wires/settings	Check speaker connections; verify impedance matching.
Remote not working	Batteries/obstructions	Replace batteries; ensure clear line of sight.
Overheating	Ventilation	Ensure adequate ventilation; check for obstructions.

Reset: Hold POWER + MODE for 10 seconds to factory reset.

Service: 1-800-555-1234; www.directedsystems.com