Directed Avital 4205 Remote Start Manual

The Directed Avital 4205 is a 2-way LCD remote start and security system with long-range operation, keyless entry, and advanced security features. This system includes a 2-way LCD remote with confirmation feedback, remote start capability, keyless entry, panic mode, and comprehensive security monitoring. Below are key sections covering features, installation, programming, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. Programming & Setup 4. Specifications 5. Remote Control Functions 6. System Operation 7. Security Features 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: 2-way LCD remote, Main control module, Shock sensor, LED status indicator, Valet switch, Wiring harness.

Feature	Description
2-way LCD remote	Confirms commands with visual feedback
Remote start range	Up to 1500 feet line-of-sight
Keyless entry	Remote door lock/unlock
Panic mode	Activates alarm for emergency situations
Security monitoring	Door, hood, trunk protection
Shock sensor	Detects impacts and vibrations
Valet mode	Temporarily disables security features
LED indicator	Shows system status
Runtime management	Adjustable remote start duration
Temperature sensor	Optional for climate control

Installation

Professional installation recommended. Gather all components and tools before beginning.

Disconnect vehicle battery: Ensure safety during installation.
Mount control module: Secure in dry, protected location away from heat sources.
Connect wiring harness: Follow vehicle-specific wiring diagram.
Install shock sensor: Mount on solid metal surface away from moving parts.
Connect LED and valet switch: Place in accessible locations.
Reconnect battery and test system.

WARNING! Professional installation recommended. Incorrect installation may damage vehicle electronics.

Programming & Setup

System programming requires specific button sequences. Refer to programming guide for detailed instructions.

Enter programming mode: Turn ignition on/off in specific sequence.
Program remotes: Press buttons in sequence to add/remove remotes.
Set runtime: Adjust remote start duration (5-60 minutes).
Configure security: Set shock sensor sensitivity and alarm duration.
Test all functions: Verify remote start, locks, and security features.

CAUTION! Follow programming instructions exactly. Incorrect programming may cause system malfunctions.

Specifications

Remote Type: 2-way LCD with confirmation
Operating Range: Up to 1500 feet line-of-sight
Frequency: 315 MHz / 434 MHz
Battery: CR2032 (remote), Vehicle battery (system)
Security Features: Door, hood, trunk monitoring; shock sensor; anti-carjack
Remote Start: Adjustable runtime (5-60 minutes)
Compatibility: Most vehicles with automatic transmission
Operating Temp: -40°F to 185°F (-40°C to 85°C)
Warranty: 1-year limited warranty

Remote Control Functions

LCD remote displays system status and confirms commands. Main buttons: LOCK, UNLOCK, REMOTE START, PANIC, TRUNK.

Button Functions: LOCK (arms security), UNLOCK (disarms security), REMOTE START (starts engine), PANIC (emergency alarm), TRUNK (trunk release). LCD shows: Vehicle status, Security alerts, Remote start confirmation, Battery level.

Programming: Hold buttons in specific sequences to access programming modes. Battery replacement: CR2032 battery, replace when LCD dims or functions weak.

System Operation

Remote start: Press REMOTE START button twice. Vehicle starts and runs for set duration.

Arm security: Press LOCK button once.
Disarm security: Press UNLOCK button once.
Remote start: Press REMOTE START twice within 3 seconds.
Panic mode: Press PANIC button for 2 seconds.
Trunk release: Press TRUNK button for 2 seconds.
Valet mode: Turn ignition on, press valet switch for 5 seconds.

Tip: Remote must be within range for commands to function. LCD confirms successful operations.

Security Features

Comprehensive security monitoring with multiple protection zones and alert types.

Door protection: Monitors all doors for unauthorized entry.
Hood/trunk protection: Sensors detect opening attempts.
Shock sensor: Adjustable sensitivity for impact detection.
Anti-carjack: Engine kill if door opened during remote start.
Panic mode: Manual activation for emergencies.
Status feedback: LCD remote shows exact alarm trigger.

WARNING! Test security features after installation. Ensure proper sensor placement for optimal protection.

Maintenance

Regular maintenance ensures optimal performance and longevity.

Check remote battery monthly
Test all functions regularly
Keep remote clean and dry
Verify system connections annually
Update programming as needed

CAUTION! Do not expose remote to extreme temperatures or moisture. Replace batteries promptly when low.

Regulatory Information

FCC Part 15: This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. IC: Complies with Industry Canada license-exempt RSS standard(s). Copyright © Directed Electronics. All rights reserved. For technical support, visit www.directed.com or call 1-800-876-0800.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote not working	Dead battery/range	Replace CR2032 battery; move closer to vehicle
Remote start fails	Safety triggers/transmission	Check hood pin, brake pedal, transmission in park
False alarms	Shock sensor sensitivity	Adjust shock sensor sensitivity downward
Doors not locking	Actuator/wiring	Check door lock actuators and wiring connections
LCD display dim	Low battery	Replace remote battery immediately
System not responding	Power/main fuse	Check main power connection and fuses

Reset: Disconnect battery for 30 seconds to reset system.

Service: 1-800-876-0800; www.directed.com