Directed Electronics 4111 Compatible with Manual Transmission

The Directed Electronics 4111 is a professional-grade remote start system specifically designed for vehicles with manual transmission. This advanced system features safety protocols for manual transmission vehicles, keyless entry, alarm functions, and smartphone compatibility. Below are key sections covering safety features, installation procedures, operation guidelines, and troubleshooting for manual transmission applications.

1. Features at a Glance 2. Installation Requirements 3. Safety Protocols 4. Technical Specifications 5. Operation Instructions 6. Programming Procedures 7. Manual Transmission Safety 8. Maintenance Guidelines 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Remote start module, 2-button remote, wiring harness, safety sensors, and manual transmission interface.

Feature	Description
Manual Transmission Safety	Prevents remote start unless vehicle is in neutral with parking brake engaged
Remote Start Range	Up to 1500 feet with clear line of sight
Keyless Entry	Lock/unlock doors remotely
Alarm System	Shock sensor and door trigger protection
Smartphone Integration	Optional mobile app control
Runtime Management	Automatic engine shutdown after preset time
Neutral Safety Switch	Monitors transmission position
Parking Brake Sensor	Ensures parking brake is engaged
LED Status Indicator	Visual system status feedback
Valet Mode	Temporarily disables remote start functions

Installation Requirements

Professional installation recommended. Gather necessary tools and components.

Vehicle Preparation: Ensure vehicle is in neutral with parking brake engaged.
Wiring Connection: Connect to ignition, starter, and neutral safety switch wiring.
Sensor Installation: Mount parking brake sensor and neutral position detector.
Module Placement: Secure control module in protected location.
System Testing: Verify all safety protocols function correctly.

WARNING! Improper installation may cause vehicle damage or safety hazards. Always use professional installer.

Safety Protocols

Manual transmission vehicles require specific safety measures for remote start operation.

Neutral Position Verification: System confirms transmission is in neutral before allowing remote start.
Parking Brake Engagement: Parking brake must be fully engaged.
Door Status Monitoring: All doors must be closed and locked.
Hood Pin Switch: Prevents remote start if hood is open.
Runtime Limiter: Automatic shutdown after 15 minutes of operation.

CAUTION! Never bypass safety protocols. Always verify vehicle is in neutral before exiting.

Technical Specifications

Compatibility: Manual transmission vehicles only
Operating Voltage: 12V DC vehicle electrical system
Remote Frequency: 315MHz or 434MHz (region dependent)
Current Draw: 15mA standby, 200mA active
Temperature Range: -40°F to 185°F (-40°C to 85°C)
Warranty: 1-year limited warranty
Security: Rolling code technology prevents code grabbing
Inputs: Neutral safety, parking brake, hood pin, door triggers
Outputs: Starter, ignition, accessory, door locks

Operation Instructions

Proper operation sequence for manual transmission vehicles.

Remote Start Procedure:

Ensure vehicle is in neutral position
Fully engage parking brake
Exit vehicle and close all doors
Lock doors using remote or key
Press and hold remote start button for 2 seconds
Wait for confirmation chirp and engine start

Remote Functions: LOCK/UNLOCK, REMOTE START, PANIC, TRUNK RELEASE (if equipped).

Programming Procedures

System programming for manual transmission specific settings.

Enter Programming Mode: Turn ignition on/off sequence
Neutral Safety Calibration: Follow prompts to set neutral position
Parking Brake Setup: Calibrate parking brake sensor
Runtime Settings: Adjust automatic shutdown timer (5-30 minutes)
Remote Programming: Add or remove remote transmitters

Tip: Refer to vehicle-specific wiring diagram for proper connections.

Manual Transmission Safety

Critical safety information for manual transmission operation.

Always verify transmission is in neutral before exiting vehicle
Ensure parking brake is fully engaged and holding
Never attempt to bypass neutral safety switch
Regularly test safety systems for proper operation
Keep remote transmitter secure and away from children
Disable system when vehicle is being serviced

WARNING! Failure to follow safety procedures may result in vehicle movement causing property damage or personal injury.

Maintenance Guidelines

Regular maintenance ensures optimal performance and safety.

Monthly Checks:

Test all remote functions
Verify neutral safety system operation
Check parking brake sensor functionality
Inspect wiring for damage or corrosion
Replace remote batteries annually

CAUTION! Only qualified technicians should perform system maintenance or repairs.

Regulatory Information

FCC Part 15: This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright © Directed Electronics. All rights reserved. For technical support, visit www.directed.com or contact 1-800-876-0800.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote start not working	Vehicle not in neutral/parking brake not set	Verify neutral position and parking brake engagement
Engine starts then stalls	Safety protocol triggered	Check door, hood, and brake sensors
Poor remote range	Low battery/interference	Replace remote battery; check for interference sources
System not responding	Blown fuse/power issue	Check vehicle fuses and power connections
False alarms	Sensor sensitivity too high	Adjust shock sensor sensitivity

Reset Procedure: Disconnect battery for 5 minutes to reset system.

Technical Support: 1-800-876-0800; www.directed.com