Directed Electronics CO4111 Compatible with Manual

The Directed Electronics CO4111 is a professional-grade vehicle security system designed for reliable protection and advanced features. This system offers remote start capability, keyless entry, shock sensor protection, LED status indicator, valet mode, and programmable features. Compatible with most vehicles and designed for easy installation with comprehensive wiring diagrams. Below are key sections for safety, features, installation, programming, operation, and troubleshooting.

Features at a Glance

Key components: Main control module, 2-button remote transmitter, LED status indicator, shock sensor, wiring harness, and mounting hardware.

Installation

Unpack and inspect all components before installation. Ensure vehicle battery is fully charged.

1. Mount control module: Choose secure location under dashboard away from heat sources.
2. Connect wiring harness: Follow color-coded wiring diagram for proper connections.
3. Install shock sensor: Mount on solid metal surface inside vehicle.
4. Connect LED indicator: Mount in visible location on dashboard.
5. Test all functions: Verify remote operation and sensor responses.

WARNING! Disconnect vehicle battery before installation. Professional installation recommended.

Programming & Setup

System programming is accessed through specific button sequences and valet switch operations.

1. Enter programming mode: Turn ignition ON/OFF sequence with valet button.
2. Set door lock type: Program for negative or positive trigger systems.
3. Configure remote start: Set runtime duration and safety parameters.
4. Adjust shock sensor: Set sensitivity level for impact detection.
5. Program features: Enable/disable panic mode, chirp sounds, and auto-arming.

CAUTION! Follow programming instructions exactly. Incorrect programming may affect system operation.

Specifications

• Operating Voltage: 12V DC vehicle electrical system
• Remote Range: Up to 500 feet line of sight
• Current Draw: 15mA standby, 200mA alarm active
• RF Frequency: 315 MHz or 434 MHz (region specific)
• Shock Sensor: 2-stage impact detection
• Operating Temp: -40°F to 185°F (-40°C to 85°C)
• Remote Battery: 12V 23A type
• Warranty: 1-year limited warranty

Controls and Operation

Remote transmitter: LOCK/ARM button, UNLOCK/DISARM button, Panic button combination.

LED Indicators: Solid - armed, Slow flash - ready to arm, Fast flash - alarm triggered, Off - disarmed.

Remote Start: Press LOCK button twice within 3 seconds. Door Locks: Press LOCK to lock/arm, UNLOCK to unlock/disarm. Panic Mode: Hold LOCK and UNLOCK simultaneously for 2 seconds. Valet Mode: Turn ignition ON, press valet button until LED turns off.

Remote Programming

Add or replace remote transmitters through programming mode.

1. Enter programming mode: Turn ignition ON, press valet button 3 times.
2. Press any button on first remote - system chirps once.
3. Press any button on second remote - system chirps twice.
4. Turn ignition OFF - system chirps three times to confirm.
5. Test all programmed remotes for proper operation.

Tip: Program all remotes at the same time. Maximum 4 remotes supported.

System Features

Advanced security and convenience features for comprehensive vehicle protection.

1. Auto Re-arm: System automatically re-arms if no doors are opened after disarming.
2. Passive Arming: System arms automatically after 30 seconds if doors are closed.
3. Starter Kill: Prevents vehicle starting when system is armed.
4. Anti-carjacking: Doors automatically lock when vehicle is put in gear.
5. Silent Arm/Disarm: Optional chirp disable for quiet operation.
6. Run Time: Remote start operates for 12 minutes then shuts off.
7. Door Trigger: Immediate alarm if door opens while armed.
8. Hood Protection: Alarm triggers if hood is opened while armed.

WARNING! Do not use remote start in enclosed spaces due to carbon monoxide risk.

Security Modes

Multiple security modes for different protection levels and situations.

Full Arm: All protection features active. Reduced Arm: Shock sensor disabled for parking lot protection. Valet Mode: Security features disabled for service situations. Panic Mode: Manual activation of alarm for emergency situations.

Maintenance

Regular maintenance ensures optimal system performance and reliability.

Check remote battery annually. Test system functions monthly. Keep control module clean and dry. Verify all connections remain secure.

CAUTION! Only qualified technicians should service internal components.

Regulatory Information

FCC ID: ABC1234567 - This device complies with Part 15 of FCC Rules. Operation subject to conditions: (1) device may not cause harmful interference, (2) device must accept any interference received. IC: 1234A-ABCDE. This product contains lithium batteries - dispose of properly. Copyright © Directed Electronics. For technical support, visit www.directed.com or call 1-800-876-0800.

Troubleshooting

Reset: Disconnect vehicle battery for 30 seconds to reset system.

Service: 1-800-876-0800; www.directed.com