Directed Video Model OHD1020B Installation Manual

The Directed Video OHD1020B is a high-definition overhead video system designed for vehicle installation, featuring 1080p resolution, wide-angle lens, built-in microphone, motion detection, parking mode recording, GPS tracking, Wi-Fi connectivity, mobile app integration, and loop recording with G-sensor impact protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Recording Modes 8. Mobile App Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 1080p HD camera module, GPS antenna, power adapter, mounting bracket, SD card slot, Wi-Fi module, microphone, and emergency recording button.

FeatureDescription
Camera Resolution1080p Full HD with wide-angle lens
GPS TrackingBuilt-in GPS for location and speed data
Wi-Fi ConnectivityFor mobile app connection and file transfer
Motion DetectionAutomatic recording when motion detected
Parking ModeContinuous monitoring while vehicle parked
G-SensorImpact detection and emergency file protection
Loop RecordingContinuous recording with automatic file overwrite
MicrophoneBuilt-in audio recording capability
Mobile AppDirected Video app for iOS and Android
Power Input12V vehicle power adapter

Installation

Unpack and inspect contents. Ensure vehicle is turned off during installation.

  1. Mount camera: Position overhead mount on windshield using suction cup or adhesive.
  2. Connect power: Route power cable to vehicle's 12V outlet or hardwire to fuse box.
  3. Install SD card: Insert compatible microSD card (Class 10 recommended).
  4. Adjust camera angle: Position for optimal front view coverage.

WARNING! Ensure camera does not obstruct driver's view. Route cables safely away from airbags and moving parts.

First-Time Setup

Power on system; follow initial setup procedure.

  1. Format SD card: Use menu to format card for first-time use.
  2. Set date/time: Configure system clock for accurate timestamping.
  3. Adjust recording settings: Set resolution, loop recording interval, motion sensitivity.
  4. Connect to mobile app: Download Directed Video app and connect via Wi-Fi.
  5. Test recording: Verify camera angle and recording quality.

CAUTION! Do not operate while driving. Complete setup while vehicle is parked.

Specifications

Controls and Settings

Access settings via physical buttons or mobile app. Front Panel: POWER, Wi-Fi, EMERGENCY, MIC.

Mobile App: Live view, playback, settings adjustment, file download, GPS tracking.

Recording Settings: Resolution (1080p/720p), loop recording (1/3/5 min), motion detection sensitivity, parking mode duration. System Settings: Date/time, language, format SD card, beep sounds, LED indicators. GPS Settings: Speed unit (mph/kmh), location tracking, geofencing.

Connecting Devices

Mobile: Download Directed Video app, connect to device Wi-Fi. Computer: USB connection for file transfer.

  1. Ensure device Wi-Fi is enabled and camera is powered on.
  2. Connect to "Directed-XXXX" Wi-Fi network in device settings.
  3. Open Directed Video app to access live view and settings.
  4. For computer access, connect via USB cable and access as removable storage.

Tip: Default Wi-Fi password is usually "12345678" or found in manual.

Recording Modes

Supports continuous, motion-activated, and emergency recording.

  1. Continuous Recording: Automatic loop recording while driving.
  2. Motion Detection: Activates recording when motion is detected near vehicle.
  3. Parking Mode: Monitors vehicle while parked and engine off.
  4. Emergency Recording: Manual trigger via emergency button; files protected from overwrite.
  5. G-Sensor Activation: Automatic emergency recording upon impact detection.

WARNING! Ensure adequate SD card storage. Low storage may interrupt recording.

Mobile App Features

Directed Video app provides live view, playback, settings adjustment, and file management.

Care & Maintenance

Regular maintenance ensures optimal performance and longevity.

  1. Lens cleaning: Use microfiber cloth to clean lens periodically
  2. SD card maintenance: Format monthly to prevent file corruption
  3. Cable inspection: Check power cable for wear or damage
  4. Mount security: Ensure mount remains firmly attached
  5. Firmware updates: Regularly check for updates via mobile app

CAUTION! Do not use chemical cleaners on lens. Avoid extreme temperatures.

Regulatory Information

FCC Part 15: Class B digital device compliant. CE certified for European markets. ICES-003 compliant for Canada. This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright © 2025 Directed Electronics. For support, visit www.directed.com or contact 1-800-486-8412.

Troubleshooting

SymptomPossible CauseCorrective Action
No powerPower connectionCheck 12V adapter connection; verify vehicle power outlet
No recordingSD card issuesFormat SD card; ensure compatible Class 10 card
Poor video qualityLens/settingsClean lens; adjust resolution settings; check lighting
Wi-Fi not connectingNetwork/passwordReset Wi-Fi; verify password; check device compatibility
GPS not workingSignal/settingsEnsure clear view of sky; check GPS settings in app
OverheatingTemperature/enclosurePark in shade; ensure proper ventilation around unit

Reset: Use reset button or format via menu to restore factory settings.

Service: 1-800-486-8412; www.directed.com/support

Directed Video Model OHD1020B Installation Manual © - All Rights Reserved 2025