directions for armor all utility vac manual vom205p

The Armor All Utility Vac VOM205P is a powerful 2-gallon wet/dry vacuum cleaner designed for automotive and household use. Features include 2.0 peak HP motor, 2-gallon capacity tank, blower function, reusable/washable filter, accessory storage, cord wrap, and carrying handle. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: 2-gallon tank, 2.0 peak HP motor, blower port, accessory storage, cord wrap, carrying handle, reusable filter.

Assembly Instructions

Unpack and inspect all components. Assemble on clean, flat surface.

1. Attach wheels: Insert wheels into designated slots on tank base.
2. Install handle: Secure carrying handle to top of tank unit.
3. Attach lid: Place lid onto tank, ensuring proper seal alignment.
4. Install filter: Place foam filter over motor intake port.
5. Connect hose: Attach hose to suction port on lid.
6. Store accessories: Place nozzles and tools in built-in storage.

WARNING! Ensure all connections are secure before operation. Do not operate without filter installed.

First-Time Setup

Prepare vacuum for initial use following these steps.

1. Inspect components: Check for shipping damage or missing parts.
2. Choose operation mode: Select wet or dry pickup based on task.
3. Install proper filter: Use foam filter for dry pickup; no filter for wet pickup.
4. Connect power: Plug into appropriate 120V outlet.
5. Test operation: Run vacuum briefly to ensure proper function.

CAUTION! Always use GFCI protected outlets when cleaning wet materials.

Specifications

• Model: VOM205P
• Motor Power: 2.0 peak HP
• Tank Capacity: 2 gallons
• Tank Material: Polypropylene
• Power Cord: Standard length with storage wrap
• Weight: Lightweight design for portability
• Filter Type: Reusable foam filter
• Operation Modes: Wet pickup, dry pickup, blower
• Voltage: 120V AC, 60Hz
• Accessories: Crevice tool, upholstery nozzle, extension wands

Controls and Functions

Main controls located on vacuum body and lid assembly.

Power Switch: On/off toggle switch with safety cover.

Suction Port: Main hose connection point for vacuum operation.

Blower Port: Alternate port for blower function operation.

Lid Latches: Secure lid to tank during operation.

Drain Spout: Located at tank bottom for easy liquid disposal.

Carrying Handle: Ergonomic grip for transport and storage.

Operating Modes

Three primary operating modes for different cleaning tasks.

1. Dry Pickup: For dust, dirt, debris with filter installed.
2. Wet Pickup: For liquids without filter installed.
3. Blower Function: For clearing debris from hard-to-reach areas.

Tip: Always switch modes with vacuum turned off and unplugged.

Wet Pickup Operation

For cleaning spills, water, and other liquids.

1. Remove filter: Ensure no filter is installed in tank.
2. Check drain: Ensure drain spout is closed securely.
3. Connect hose: Attach hose to suction port.
4. Plug in: Connect to GFCI protected outlet.
5. Begin cleaning: Turn on switch and clean liquid surfaces.
6. Empty tank: Turn off, unplug, and drain through spout when full.

WARNING! Never use with flammable liquids. Monitor tank level to prevent overflow.

Dry Pickup Operation

For vacuuming dust, dirt, and dry debris.

1. Install filter: Ensure foam filter is properly seated.
2. Select accessory: Choose appropriate nozzle for task.
3. Connect hose: Attach hose and selected accessory.
4. Power on: Turn on switch and begin vacuuming.
5. Empty tank: Turn off, unplug, and empty collected debris.
6. Clean filter: Tap or wash filter as needed between uses.

CAUTION! Do not vacuum hot ashes, burning materials, or flammable substances.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Empty tank after each use to prevent odor and mold.
2. Clean filter regularly by tapping out debris or washing with mild soap.
3. Inspect hose and accessories for blockages or damage.
4. Wipe exterior with damp cloth; avoid harsh chemicals.
5. Store in dry location with cord properly wrapped.

CAUTION! Always unplug before performing any maintenance or cleaning.

Safety Information

Important safety precautions for proper operation.

• Always unplug when not in use or during maintenance
• Use GFCI protection when cleaning wet materials
• Do not vacuum flammable liquids or explosive materials
• Keep hair, loose clothing, and fingers away from openings
• Do not use with damaged cord or plug
• Ensure proper filter installation for each operation mode
• Do not leave vacuum unattended while plugged in
• Keep work area well-lit and ventilated

Troubleshooting

Service: For technical support, contact customer service at 1-800-XXX-XXXX

Warranty: Limited warranty coverage; see packaging for details