Directions for Armor All Utility Vac Manual

The Armor All Utility Vac is a versatile wet/dry vacuum cleaner designed for automotive and household use. This powerful vacuum features a 2.5-gallon capacity tank, 2.0 peak HP motor, reusable filter system, multiple attachments, and dual functionality for both wet and dry pickup. Below are comprehensive sections covering safety, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Instructions 3. Assembly Instructions 4. Specifications 5. Operating Controls 6. Wet Pickup Operation 7. Dry Pickup Operation 8. Maintenance & Cleaning 9. Storage Instructions 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 2.5-gallon tank, 2.0 peak HP motor, reusable foam filter, extension wands, crevice tool, upholstery brush, wet nozzle, and power cord with storage hooks.

Feature	Description
Tank Capacity	2.5 gallons for extended cleaning sessions
Motor Power	2.0 peak HP for strong suction
Filter System	Reusable foam filter for wet/dry operation
Power Cord	20-foot cord with built-in storage hooks
Attachments	Complete set for various cleaning applications
Tank Drain	Easy-empty drain port for wet cleanup
Carrying Handle	Integrated handle for easy transport
ON/OFF Switch	Simple push-button power control
Wheels	Two durable wheels for mobility
Locking Lid	Secure lid with locking mechanism

Safety Instructions

Read all instructions before operating the vacuum cleaner.

Always unplug before maintenance or filter changes.
Do not use with flammable liquids or explosive materials.
Keep hair, loose clothing, and fingers away from openings.
Use only Armor All replacement parts and accessories.
Do not vacuum hot ashes, coals, or toxic materials.

WARNING! Risk of electric shock. Do not use outdoors or on wet surfaces. Keep cord away from heated surfaces.

Assembly Instructions

Unpack all components and inspect for damage.

Attach wheels: Insert axle through wheel hubs and secure with provided clips.
Install handle: Slide carrying handle into mounting brackets and tighten screws.
Assemble extension wands: Connect metal tubes together for extended reach.
Attach tools: Select appropriate tool (brush, crevice, wet nozzle) for your cleaning task.
Install filter: Place foam filter over intake port for dry pickup operation.

CAUTION! Ensure all connections are secure before operation.

Specifications

Tank Capacity: 2.5 gallons
Motor: 2.0 peak HP
Voltage: 120V AC, 60Hz
Power Cord: 20 feet
Weight: 8.5 lbs (empty)
Dimensions: 15" H x 12" W x 15" D
Filter Type: Reusable foam
Operation: Wet and dry pickup
Warranty: 1-year limited
Accessories: Extension wands, crevice tool, brush, wet nozzle

Operating Controls

Simple push-button controls located on top of vacuum unit.

Power Switch: Red push-button for ON/OFF operation.

Lid Lock: Twist clockwise to lock, counterclockwise to unlock.

Drain Port: Remove cap to empty liquid contents.

Attachment Port: Standard 1.25-inch diameter for all accessories.

Cord Storage: Built-in hooks on back of unit for neat cord storage.

Wet Pickup Operation

For liquid spills, flooded areas, and water extraction.

Remove foam filter for wet pickup operation.
Attach wet nozzle or extension wand as needed.
Plug into grounded outlet and turn ON.
Move nozzle slowly over wet area for maximum extraction.
Turn OFF and unplug when tank is full or job is complete.
Empty tank through drain port immediately after use.

WARNING! Never use with hot liquids. Always unplug before emptying tank.

Dry Pickup Operation

For dust, dirt, debris, and general cleaning.

Ensure foam filter is properly installed.
Select appropriate attachment for cleaning task.
Plug into grounded outlet and turn ON.
Move nozzle over surfaces using slow, overlapping passes.
Turn OFF and unplug when finished.
Empty tank and clean filter after each use.

Tip: For fine dust, slightly dampen filter for better filtration.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Empty tank after each use to prevent odors and mold.
Clean foam filter monthly with mild soap and water.
Inspect power cord regularly for damage.
Check wheels and moving parts for wear.
Store in dry, protected area when not in use.

CAUTION! Always unplug and ensure unit is completely dry before maintenance.

Storage Instructions

Proper storage extends product life and maintains performance.

Empty and dry tank completely.
Clean all attachments and filters.
Wrap cord around storage hooks.
Store attachments in designated bag or container.
Keep in cool, dry place away from direct sunlight.

Note: Do not store with liquids in tank to prevent damage and odors.

Regulatory Information

UL Listed: Certified for safety standards. FCC Part 15: Class B digital device compliance. Copyright © 2025 Armor All; trademarks of The Armor All/STP Products Company. For technical support, visit www.armorall.com or contact 1-800-858-2536. Made in China.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Unplugged/bad outlet	Check power cord connection; try different outlet; check circuit breaker.
Weak suction	Full tank/clogged filter	Empty tank; clean or replace filter; check for hose blockages.
Motor overheating	Continuous use/clog	Turn off and allow to cool; check for obstructions; clean filter.
Leaking tank	Damaged seal/crack	Inspect lid seal; check tank for cracks; replace damaged parts.
Unusual noise	Foreign object/motor issue	Turn off immediately; check for objects in fan; contact service.

Service: 1-800-858-2536; www.armorall.com

Replacement Parts: Order genuine Armor All parts only.