Directions for Floor Mate Plus Manual

The Floor Mate Plus is a versatile hard floor cleaning system that washes, scrubs, and dries hard-surface floors in one easy step. It features a dual-tank system for clean and dirty water separation, spinning scrub brushes, easy-fill tanks, and multiple cleaning modes for different floor types. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Instructions 3. Assembly and Setup 4. Specifications 5. Controls and Settings 6. Operation Instructions 7. Cleaning Modes 8. Maintenance and Care 9. Storage Instructions 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Dual-tank system, spinning scrub brushes, easy-fill tanks, multiple cleaning modes, cord storage, and easy-empty dirty tank.

Feature	Description
Clean water tank	Holds cleaning solution and fresh water
Dirty water tank	Collects used water and debris
Spinning scrub brushes	Rotating brushes for deep cleaning
Cleaning modes	Multiple settings for different floor types
Easy-fill design	Simple tank filling and emptying
Cord storage	Built-in cord management system
Handle controls	Easy-to-access buttons and switches
Brush release	Quick-release mechanism for brush cleaning
Solution dispenser	Controlled cleaning solution distribution
Power indicator	LED lights showing operational status

Safety Instructions

Read all instructions before use to ensure safe operation.

Always unplug before maintenance or cleaning.
Use only recommended cleaning solutions.
Keep away from children and pets during operation.
Do not use on uneven or damaged flooring.
Avoid electrical hazards; keep away from water sources.

WARNING! Do not immerse in water or use outdoors. Ensure proper ventilation during use.

Assembly and Setup

Unpack and assemble components before first use.

Attach handle: Align and secure handle to main unit.
Install brushes: Insert scrub brushes into brush housing.
Fill clean tank: Add water and recommended cleaning solution.
Connect power: Plug into standard electrical outlet.
Test operation: Run unit briefly to ensure proper function.

CAUTION! Ensure all connections are secure before operation.

Specifications

Tank Capacity: Clean tank: 1.5L, Dirty tank: 1.3L
Power Source: 120V AC, 60Hz
Cord Length: 25 feet
Brush Speed: Variable speed control
Cleaning Modes: 3 modes (Light, Normal, Heavy)
Weight: 12 lbs
Dimensions: 15" x 12" x 45"
Floor Types: Tile, Linoleum, Hardwood, Laminate
Warranty: 1-year limited warranty

Controls and Settings

Access controls via handle-mounted buttons and switches.

Handle Controls: Power button, Mode selector, Brush control, Solution dispenser.

Cleaning Modes: LIGHT (gentle cleaning), NORMAL (regular cleaning), HEAVY (deep scrubbing). Brush Settings: Adjustable brush pressure and rotation speed. Solution Control: Variable solution dispensing rate. Indicator Lights: Power status, Tank levels, Brush status.

Operation Instructions

Follow these steps for proper cleaning operation.

Prepare area: Remove obstacles and loose debris.
Fill tanks: Add clean water and solution to clean tank.
Select mode: Choose appropriate cleaning mode for floor type.
Begin cleaning: Press power button and move unit forward.
Overlap passes: Slightly overlap cleaning paths for complete coverage.
Empty tanks: Drain dirty tank and rinse after use.

Tip: Work in sections for large areas to maintain cleaning efficiency.

Cleaning Modes

Three cleaning modes for different floor conditions.

Light Mode: Gentle cleaning for daily maintenance and delicate floors.
Normal Mode: Standard cleaning for regular maintenance.
Heavy Mode: Intensive scrubbing for heavily soiled areas.
Spot Cleaning: Concentrated cleaning for stubborn stains.
Edge Cleaning: Special setting for cleaning along baseboards.

WARNING! Use appropriate mode for floor type to prevent damage.

Maintenance and Care

Regular maintenance ensures optimal performance and longevity.

After each use: Empty and rinse both tanks thoroughly.
Weekly: Clean brushes and check for wear.
Monthly: Inspect and clean solution delivery system.
As needed: Replace brushes and filters when worn.
Storage: Clean and dry completely before storing.

CAUTION! Unplug unit before performing any maintenance.

Storage Instructions

Proper storage prevents damage and maintains unit readiness.

Clean all components thoroughly. Empty and dry both tanks completely. Store brushes separately to maintain shape. Wrap cord neatly using built-in storage. Store in cool, dry location away from direct sunlight.

CAUTION! Do not store with water in tanks to prevent mold and damage.

Regulatory Information

UL Listed: Meets UL safety standards for household cleaning appliances. FCC Part 15: Class B digital device compliant with residential interference limits. Copyright © 2025 Floor Mate Plus; all rights reserved. For support, visit www.floormateplus.com or contact 1-800-555-1234.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit won't start	Power connection	Check power cord; ensure outlet is working; reset unit.
Poor cleaning	Brush condition/solution	Replace worn brushes; check solution concentration.
Water not dispensing	Clogged system	Clean solution lines; check tank connections.
Streaking floors	Dirty brushes/tanks	Clean brushes; empty and rinse dirty tank.
Unusual noise	Obstructions/wear	Check for debris; inspect brushes and moving parts.

Reset: Unplug for 30 seconds, then restart if available.

Service: 1-800-555-1234; www.floormateplus.com