DIRECTV CCK-W Installation Manual

The DIRECTV CCK-W is a wireless video bridge kit that enables wireless connectivity between DIRECTV Genie Mini clients and the Genie HD DVR system. This installation manual provides comprehensive guidance for proper setup, configuration, and troubleshooting of the CCK-W wireless client connector to ensure optimal performance with your DIRECTV entertainment system.

1. Package Contents 2. System Requirements 3. Installation Overview 4. Technical Specifications 5. Hardware Setup 6. Wireless Configuration 7. LED Status Indicators 8. Network Pairing 9. Troubleshooting 10. Safety Information 11. Support & Warranty

Package Contents

Before beginning installation, verify all components are present in the CCK-W kit.

Component	Quantity	Description
CCK-W Wireless Client	1	Main wireless bridge unit
Power Adapter	1	12V DC power supply
Coaxial Cable	1	6-foot RG6 cable
Ethernet Cable	1	6-foot CAT5e cable
Mounting Hardware	1 set	Screws and wall anchors
Quick Start Guide	1	Basic installation instructions

System Requirements

Ensure your system meets these requirements before installation.

Compatible Receiver: DIRECTV Genie HD DVR (model HR44 or newer)
Client Support: Genie Mini clients (model C41/C51/C61)
Power Source: Standard 120V AC outlet
Wireless Range: Up to 50 feet through walls
Operating Temperature: 32°F to 104°F (0°C to 40°C)

Installation Overview

Follow these steps for proper CCK-W installation and configuration.

Position the CCK-W within wireless range of your Genie Mini client
Connect coaxial cable from wall outlet to CCK-W INPUT port
Connect Ethernet cable from CCK-W to Genie Mini client
Plug power adapter into CCK-W and electrical outlet
Wait for LED status indicators to stabilize
Perform wireless pairing with main Genie receiver

IMPORTANT! Ensure all connections are secure before powering on the system.

Technical Specifications

Model: CCK-W Wireless Client Connector
Wireless Protocol: 5GHz Wireless Video Bridge
Frequency Range: 5.15-5.85 GHz
Max Data Rate: Up to 300 Mbps
Power Input: 12V DC, 1.5A
Connectors: F-type coaxial, RJ45 Ethernet
Dimensions: 5.1" x 3.9" x 1.2"
Weight: 0.8 lbs

Hardware Setup

Proper physical installation is critical for optimal performance.

Location Selection: Choose central location between Genie and Mini client
Mounting: Use included hardware for wall mounting if desired
Cable Connections: - Coaxial from wall to CCK-W INPUT - Ethernet from CCK-W to Genie Mini client - Power adapter to CCK-W and wall outlet
Antenna Orientation: Position unit vertically for best signal

NOTE: Avoid placing near metal objects or other wireless devices that may cause interference.

Wireless Configuration

The CCK-W creates a dedicated wireless network for video streaming.

Setting	Default Value	Description
Network Name	Auto-generated	Unique SSID for wireless bridge
Security	WPA2-AES	Automatic encryption enabled
Channel	Auto-select	Automatically chooses clearest channel
Pairing Mode	Active for 2 hours	Time window for client discovery

LED Status Indicators

Monitor CCK-W status using the front panel LED indicators.

LED Color	Pattern	Status
Green	Solid	Normal operation
Green	Blinking	Pairing mode active
Amber	Solid	Weak wireless signal
Red	Solid	Connection error
Red	Blinking	Hardware failure
Off	No light	No power

Network Pairing

Pair the CCK-W with your Genie receiver system.

Ensure Genie receiver and CCK-W are powered on
Press and hold WPS button on CCK-W for 3 seconds
LED will blink green indicating pairing mode
On Genie receiver: Menu > Settings > Whole-Home > Client List
Select "Add Wireless Client" and follow on-screen prompts
Wait for confirmation message (typically 2-5 minutes)

TIP: Keep CCK-W within 30 feet of Genie receiver during initial pairing.

Troubleshooting

Common issues and solutions for CCK-W installation.

Problem	Possible Cause	Solution
No power LED	Power connection	Check power adapter and outlet; ensure secure connection
Blinking red LED	Hardware fault	Power cycle unit; check for physical damage
No client connection	Pairing failed	Reset pairing mode; ensure within range
Poor video quality	Signal interference	Relocate CCK-W; avoid wireless interference sources
Client not found	Network discovery	Restart discovery process; check Ethernet connection

Safety Information

Important safety precautions for installation and operation.

Use only the provided power adapter
Do not expose to water or moisture
Ensure proper ventilation around unit
Do not attempt to disassemble the device
Keep away from heat sources and direct sunlight
Use appropriate mounting hardware for wall installation

WARNING! Risk of electric shock - disconnect power before servicing connections.

Support & Warranty

DIRECTV support resources and warranty information.

Technical Support: 1-800-531-5000

Online Support: directv.com/help

Warranty Period: 1 year from date of purchase

Replacement: Contact DIRECTV for warranty claims

Documentation: Additional resources available at directv.com/manuals