DIRECTV CCK-W Wireless DECA Cinema Connection Kit Manual

The DIRECTV CCK-W Wireless DECA Cinema Connection Kit enables wireless connectivity for DIRECTV Cinema devices, providing seamless integration with your home entertainment system. This kit includes wireless DECA adapters, power supplies, and necessary cables for establishing a reliable wireless connection between your DIRECTV receiver and Cinema devices. Below are key sections covering setup, features, troubleshooting, and technical specifications.

1. Features at a Glance 2. Package Contents 3. Installation & Setup 4. Specifications 5. LED Indicator Status 6. Connecting to DIRECTV System 7. Wireless Pairing Process 8. Network Configuration 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Wireless DECA Adapter, Power Supply, Ethernet Cable, Installation Guide.

Feature	Description
Wireless Connectivity	Enables wireless connection between DIRECTV receiver and Cinema devices
DECA Technology	Digital Entertainment Content Adapter for media streaming
Ethernet Port	For network connectivity and internet access
LED Status Indicators	Power, Wireless, Network connection status
Power Input	DC 5V power adapter
Pairing Button	For secure wireless device pairing
Reset Button	Factory reset functionality
Compatibility	Works with DIRECTV Cinema systems and compatible receivers
Setup Wizard	Guided installation process
Security	WPA2 wireless encryption

Package Contents

Unpack and verify all components are present.

Wireless DECA Adapter (2 units)
Power Adapters (2 units)
Ethernet Cable (6 ft)
Quick Start Guide
Warranty Information

WARNING! Do not use damaged components. Contact support if any items are missing.

Installation & Setup

Follow these steps for proper installation.

Position adapters: Place within 30 feet of each other for optimal signal.
Connect power: Plug power adapters into electrical outlets and connect to DECA adapters.
Connect to DIRECTV receiver: Use Ethernet cable to connect one adapter to receiver.
Connect to Cinema device: Use second adapter with Cinema device Ethernet port.
Power on: LED indicators should illuminate.
Pair devices: Press pairing button on both adapters within 2 minutes.

CAUTION! Ensure proper ventilation; do not block adapter vents.

Specifications

Wireless Standard: 802.11n 2.4GHz
Data Rate: Up to 300Mbps
Security: WPA2-PSK encryption
Ports: Ethernet 10/100, Power DC 5V
LED Indicators: Power, Wireless, Ethernet
Operating Range: Up to 100 feet indoors
Power Consumption: 5W maximum
Operating Temperature: 32°F to 104°F (0°C to 40°C)
Compatibility: DIRECTV HR20 and later models

LED Indicator Status

Monitor device status through LED indicators.

LED Color	Status	Meaning
Green Solid	Power On	Device powered and operational
Blue Solid	Wireless Connected	Successful wireless connection
Blue Blinking	Pairing Mode	Ready for device pairing
Amber Solid	Ethernet Connected	Wired connection active
Red Solid	Error	Connection or hardware issue
Off	No Power	Check power connection

Connecting to DIRECTV System

Integrate with your existing DIRECTV setup.

Ensure DIRECTV receiver is powered off.
Connect Ethernet cable from DECA adapter to receiver's Ethernet port.
Connect second DECA adapter to Cinema device.
Power on all devices.
Wait for LED indicators to show connection status.
Follow on-screen setup prompts if available.

Tip: Use shortest Ethernet cables possible for best performance.

Wireless Pairing Process

Establish secure wireless connection between adapters.

Position both adapters within 10 feet for initial pairing.
Press and hold pairing button on first adapter for 3 seconds.
Within 2 minutes, press pairing button on second adapter.
Wait for blue LED to become solid on both units.
If pairing fails, reset both adapters and repeat process.
Test connection by checking DIRECTV receiver status.

WARNING! Pairing must be completed within 2-minute window for security.

Network Configuration

Configure network settings for optimal performance.

SSID: DIRECTV-CCKW-XXXX (unique identifier)
Channel Selection: Auto-selects least congested channel
IP Assignment: DHCP enabled by default
Firewall: Built-in network protection
Firmware Updates: Automatic when connected to internet

Access advanced settings through DIRECTV receiver menu under Network Settings.

Care & Maintenance

Keep your equipment in optimal condition.

Keep adapters in well-ventilated areas
Dust with dry, soft cloth regularly
Avoid liquid exposure
Do not stack adapters or place heavy objects on them
Keep away from heat sources and direct sunlight

CAUTION! Unplug before cleaning. Do not use chemical cleaners.

Regulatory Information

FCC Part 15: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Copyright © DIRECTV. All trademarks are property of their respective owners. For technical support, visit www.directv.com/support or call 1-800-531-5000.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No LED lights	Power issue	Check power connections; try different outlet
Blue LED blinking continuously	Pairing failed	Reset both adapters; repeat pairing process
Red LED solid	Hardware error	Power cycle devices; check connections
Poor video quality	Weak signal	Reposition adapters; reduce distance/obstacles
No connection to receiver	Cable/configuration	Check Ethernet cables; verify receiver compatibility
Intermittent connection	Interference	Change location; avoid microwave ovens, cordless phones

Reset Procedure: Hold reset button for 10 seconds to restore factory settings.

Service & Support: 1-800-531-5000; www.directv.com/support