DIRECTV H24 HD Receiver Manual

The DIRECTV H24 HD Receiver is a high-definition satellite receiver featuring MPEG-4 AVC decoding, Dolby Digital audio support, 1080p/720p/480p/480i video output, built-in DIRECTV on-demand capability, USB port for external storage, HDMI output, component video, composite video, optical audio output, coaxial digital audio, Ethernet port for broadband connection, and interactive program guide. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Recording and Playback 8. Parental Controls 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: HD satellite receiver, Remote Control, HDMI output, Component video, Composite video, Optical audio, USB port, Ethernet port.

Feature	Description
HDMI output	For high-definition digital video and audio connection
Component video	For analog HD video connection
Composite video	For standard definition video connection
Optical audio	For digital audio output
USB port	For external storage devices
Ethernet port	For broadband internet connection
SAT IN	For satellite dish connection
POWER	Turns receiver on/off
RESET	Resets receiver to factory defaults
MENU	Accesses main menu system

Installation

Unpack and inspect contents. Place receiver in well-ventilated area.

Connect satellite dish: Run coaxial cable from dish to SAT IN port on receiver.
Connect to TV: Use HDMI for best quality, or component/composite for alternative connections.
Connect audio: Use optical audio for surround sound systems.
Connect broadband: Use Ethernet cable for on-demand features.
Plug into AC power.

WARNING! Ensure proper ventilation; do not block air vents. Use surge protector.

First-Time Setup

Power on receiver; follow on-screen prompts.

Satellite setup: Run satellite signal setup to acquire signal.
Program guide download: Allow receiver to download latest program guide.
Resolution setup: Set video output resolution (1080p recommended for HD TVs).
Audio setup: Configure audio output format.
Network setup: Configure broadband connection for on-demand content.

CAUTION! Do not interrupt satellite signal during initial setup.

Specifications

Video Output: 1080p, 720p, 480p, 480i
Audio Output: Dolby Digital, Stereo
Tuner: MPEG-4 AVC HD
Connections: HDMI, Component, Composite, Optical Audio, USB, Ethernet
Recording: External storage via USB
Interactive Features: DIRECTV on-demand, program guide
Power Source: 120V AC, 60Hz
Operating Temp: 32°F to 104°F (0°C to 40°C)

Controls and Settings

Access menu system via MENU button. Front Panel: POWER, CHANNEL UP/DOWN, SELECT.

Remote: POWER, Numeric buttons, GUIDE, MENU, INFO, EXIT, DASH (-), CHANNEL UP/DOWN, VOLUME UP/DOWN, MUTE, LIST, ACTIVE.

Display: Resolution settings, screen format, closed captioning. Audio: Digital audio output, volume control. System: Network setup, satellite setup, system information. Parental: Ratings locks, purchase controls.

Connecting Devices

TV: HDMI, component, or composite. Audio: Optical for surround sound. Network: Ethernet for broadband.

Turn off receiver and TV before connecting.
Use HDMI for single-cable HD connection.
Connect optical audio to home theater system.
Connect Ethernet cable for on-demand features.

Tip: Use high-speed HDMI cables for best performance.

Recording and Playback

Supports external USB storage for recording.

Connect USB storage: Format device through receiver menu.
Record programs: Press RECORD button or schedule recordings.
Playback recordings: Access through LIST menu.
Manage recordings: Delete, protect, or manage storage.
Pause live TV: Use PAUSE button during broadcast.

WARNING! Do not remove USB storage during recording or playback.

Parental Controls

Set viewing restrictions: Menu > Parental Controls > Set Passcode. Block programs by rating, channel, or title. Purchase controls for pay-per-view.

Care & Maintenance

Unplug before cleaning. Use dry cloth only; no liquids. Keep vents clear for proper ventilation.

CAUTION! Do not place objects on top of receiver. Ensure adequate air circulation.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
No satellite signal	Dish alignment/connections	Check dish alignment; ensure cables connected securely; run signal test.
No video/audio	HDMI/connection issues	Check HDMI cable; try different input; reset receiver.
Remote not working	Batteries/obstructions	Replace batteries; ensure clear line of sight to receiver.
On-demand not working	Network connection	Check Ethernet connection; restart receiver; test broadband.
Recording failed	USB storage issues	Check USB device compatibility; reformat storage; ensure adequate space.

Reset: Menu > Settings > Reset > Reset Receiver

Service: 1-800-531-5000; www.directv.com