DIRECTV MDR1R0-01 Manual

The DIRECTV MDR1R0-01 is a multi-room viewing device that allows you to watch DIRECTV programming on additional TVs throughout your home. This device works with your main DIRECTV receiver to extend satellite TV service to other rooms without requiring additional satellite dishes or separate subscriptions. Below are key sections covering setup, operation, troubleshooting, and technical specifications.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operation Guide 8. Network Setup 9. Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Multi-room receiver, Remote Control, Ethernet port, HDMI output, Coaxial connection, USB port, Power adapter.

Feature	Description
Ethernet port	For network connection and software updates
HDMI output	For high-definition video and audio connection
Coaxial output	For RF modulation to additional TVs
USB port	For future enhancements and service
Power input	For power connection
IR sensor	For remote control reception
Status LED	Indicates power and connection status
RESET	Factory reset button
POWER	Turns device on/off

Installation

Unpack and inspect contents. Place near secondary TV location.

Connect to TV: Use HDMI cable for best quality or coaxial cable for RF connection.
Connect to network: Use Ethernet cable to router for software updates and guide data.
Connect to main receiver: Ensure main DIRECTV receiver is connected to same network.
Plug into AC power using provided power adapter.

WARNING! Ensure proper ventilation; do not block vents. Use stable surface.

First-Time Setup

Power on device; follow on-screen setup wizard.

Select language: Choose preferred language for menus and guides.
Network setup: Connect to home network via Ethernet.
Pair with main receiver: Follow prompts to detect and pair with main DIRECTV receiver.
Channel download: Allow device to download channel information and guide data.
Remote setup: Program remote control for TV operation.

CAUTION! Do not interrupt setup process; allow complete initialization.

Specifications

Model: MDR1R0-01
Video Output: HDMI, Composite, Coaxial RF
Audio Output: HDMI, Digital Optical, Analog Stereo
Network: Ethernet 10/100
Resolution: Up to 1080p HD
Power: 12V DC, 2A power adapter
Operating Temp: 32°F to 104°F (0°C to 40°C)
Dimensions: 10.2" x 7.1" x 1.2"
Weight: 2.2 lbs

Controls and Settings

Access menu system via remote control. Front Panel: POWER button, Status LED, IR sensor.

Remote: POWER, Guide, Menu, Info, directional pad, Select, Exit, Volume, Channel, Number pad, Last, Mute.

Settings: Display (resolution, screen format), Audio (digital audio output, volume control), Network (connection status, IP settings), System (software update, diagnostics), Parental Controls (ratings, locks).

Connecting Devices

TV Connection: HDMI for HD, Coaxial for RF distribution. Network: Ethernet to router.

Turn off all devices before connecting cables.
Connect HDMI cable from MDR1R0-01 to TV HDMI input.
Connect Ethernet cable to router or network switch.
Connect power adapter and turn on devices.
Select correct input on TV (HDMI 1, HDMI 2, etc.).

Tip: Use high-speed HDMI cables for best performance.

Operation Guide

Basic remote functions and menu navigation.

Power: Press POWER to turn device on/off.
Guide: Press GUIDE to view program guide.
Menu: Press MENU to access settings and features.
Channel Change: Use CHANNEL UP/DOWN or number pad.
Volume Control: Use VOLUME buttons (when remote programmed for TV).
Info: Press INFO for program information.
Last: Press LAST to toggle between current and previous channel.

WARNING! Remote requires line-of-sight to IR sensor on front panel.

Network Setup

Network connection required for guide data and software updates.

Connect Ethernet cable from router to MDR1R0-01.
Access Network Settings in menu system.
Select "Wired Connection" and follow prompts.
Verify connection status in Network Information screen.
Allow device to download latest software if prompted.

Note: Continuous internet connection recommended for full functionality.

Maintenance

Keep device clean and well-ventilated. Unplug before cleaning.

CAUTION! Do not use liquid cleaners; use dry cloth only. Ensure proper airflow around device.

Regulatory Information

FCC Part 15: Class B digital device compliant. This device complies with part 15 of the FCC Rules. Copyright © DIRECTV. DIRECTV and the Cyclone Design logo are trademarks of DIRECTV, LLC. For technical support, visit directv.com/help or call 1-800-531-5000.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No picture	Input selection/cables	Verify TV input selection; check HDMI/coaxial connections
No guide data	Network connection	Check Ethernet cable; verify network connectivity
Remote not working	Batteries/obstructions	Replace batteries; ensure line-of-sight to IR sensor
No sound	Audio settings	Check audio output settings; verify TV volume
Cannot pair with main receiver	Network issues	Ensure both devices on same network; restart devices
Pixelation/freezing	Signal strength	Check main receiver signal; verify network connection

Reset: Use recessed RESET button for 10 seconds to factory reset.

Support: 1-800-531-5000; directv.com/help