DIRECTV RC64RB Manual

The DIRECTV RC64RB is a universal remote control designed for use with DIRECTV receivers and various home entertainment devices. It features backlit buttons, learning capability, RF compatibility, and can control up to 4 devices including TV, audio system, and streaming devices. Below are key sections for features, setup, programming, operation, and troubleshooting.

Features at a Glance

Key components: Backlit buttons, RF capability, learning function, multi-device control, DIRECTV integration.

Feature	Description
Backlit buttons	Illuminated keys for low-light viewing
RF capability	Works through walls and cabinets
Learning function	Can learn commands from other remotes
Multi-device control	Controls up to 4 devices simultaneously
DIRECTV integration	Optimized for DIRECTV receivers
Universal compatibility	Works with most TV and audio brands
MODE buttons	TV, AUX, DVD, AUDIO device selection
Navigation cluster	Directional pad for menu navigation
Number pad	Direct channel entry and numeric input
Special function keys	GUIDE, DVR, INFO, ACTIVE buttons

Package Contents

Unpack and verify all components are present.

• DIRECTV RC64RB Remote Control
• 2 AA batteries
• Quick Start Guide
• Warranty Information
• Support contact card

NOTE: Contact support if any items are missing or damaged.

Remote Control Layout

Familiarize yourself with the button layout and functions.

1. Top Section: POWER, MUTE, VOLUME, CHANNEL buttons
2. Center Section: Navigation pad, SELECT, MENU, EXIT
3. Lower Section: Number pad, colored ACTION buttons
4. Mode Selection: TV, AUX, DVD, AUDIO mode buttons
5. Special Functions: GUIDE, DVR, INFO, ACTIVE, LIST

Tip: Backlight activates when any button is pressed in low light.

Battery Installation

Proper battery installation ensures optimal performance.

1. Turn remote upside down and locate battery compartment.
2. Slide cover downward to open battery compartment.
3. Insert 2 AA batteries observing correct polarity (+/-).
4. Replace battery cover by sliding upward until it clicks.

WARNING! Use only fresh batteries. Do not mix old and new batteries.

Programming the Remote

Program remote to control your TV and other devices.

1. Turn on the device you want to control (TV, audio system, etc.).
2. Press and hold MUTE and SELECT simultaneously until LED blinks twice.
3. Enter 5-digit code for your device brand using number pad.
4. Press POWER to test; if device turns off, programming is successful.
5. If unsuccessful, repeat with alternate code for your brand.

CAUTION! Keep original remote handy during programming process.

Device Control Setup

Configure remote to control multiple devices.

• TV Control: Program using TV mode button and TV codes
• Audio System: Use AUDIO mode button and audio codes
• DVD/Blu-ray: Program with DVD mode button
• Auxiliary Devices: Use AUX mode for streaming devices or gaming consoles

Supported Brands: Samsung, Sony, LG, Vizio, Panasonic, Toshiba, and most major brands.

Advanced Features

Utilize advanced functions for enhanced control.

1. Learning Function: Teach remote commands from original remote
2. Macro Programming: Program multiple commands to single button
3. RF Setup: Configure for RF operation with compatible receivers
4. Button Lock: Prevent accidental button presses
5. Factory Reset: Restore original settings if needed

Note: Advanced features may require specific setup procedures.

RF Setup

Configure remote for RF operation with compatible DIRECTV receivers.

1. Ensure receiver supports RF remote capability.
2. Press and hold MUTE and SELECT for 5 seconds until LED flashes.
3. Press 9-6-1 on number pad.
4. Follow on-screen prompts to complete RF pairing.
5. Test remote operation from different rooms.

Benefit: RF operation works without direct line of sight to receiver.

Care & Maintenance

Proper care ensures long remote life.

• Clean with dry, soft cloth only
• Keep away from liquids and extreme temperatures
• Replace batteries when performance decreases
• Store in dry location when not in use
• Avoid dropping or rough handling

WARNING! Do not use chemicals or abrasive cleaners.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote not working	Dead batteries	Replace with fresh AA batteries
Buttons not responding	Wrong mode selected	Press correct MODE button for device
Limited range	Obstructions/low batteries	Remove obstacles; replace batteries
Not controlling device	Incorrect programming	Reprogram with correct device code
Backlight not working	Ambient light sensor	Test in low light conditions
RF not functioning	Pairing issue	Repeat RF pairing procedure

Reset Procedure: Remove batteries, press all buttons for 30 seconds, reinstall batteries.

Support: 1-800-531-5000; www.directv.com/remotehelp