DIRECTV RC66RX RF Remote Control Manual

The DIRECTV RC66RX is an advanced RF remote control designed for use with DIRECTV receivers and compatible devices. This remote features RF (Radio Frequency) technology that allows operation without direct line-of-sight, supporting multiple device control including TV, audio systems, and streaming devices. It includes backlit buttons, voice control capability, programmable macros, and can control up to 4 devices simultaneously. Below are key sections covering features, setup, programming, operation, and troubleshooting.

1. Features at a Glance 2. Package Contents 3. Remote Control Overview 4. Battery Installation 5. Pairing with DIRECTV Receiver 6. Programming for Other Devices 7. Advanced Features 8. Voice Control Setup 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: RF transmitter, backlit buttons, microphone for voice control, LCD display, device selection buttons, navigation cluster.

Feature	Description
RF Technology	Operates without line-of-sight up to 100 feet
Backlit Buttons	Illuminated keys for low-light viewing
Voice Control	Integrated microphone for voice commands
Multi-Device Control	Controls TV, audio, streaming devices, and DIRECTV receiver
Programmable Macros	Custom button sequences for complex operations
LCD Display	Shows device status and battery level
POWER	Turns controlled devices on/off
MENU	Accesses device menus and settings
GUIDE	Displays program guide (DIRECTV)
DVR Controls	Play, pause, record, and navigate recordings

Package Contents

Unpack and verify all components are present.

DIRECTV RC66RX Remote Control
2 AA batteries
Quick Start Guide
Warranty Information
Safety Instructions

NOTE: Contact customer support if any items are missing or damaged.

Remote Control Overview

Front panel layout and button functions.

Top Section: POWER, MUTE, Number Pad (0-9), DIRECTV, DVR
Middle Section: Navigation Arrows, SELECT, MENU, GUIDE, INFO
Bottom Section: Volume Controls, Channel Controls, Device Buttons (TV, AUDIO, AUX)
Side Buttons: Voice Control, Backlight

LCD Display: Shows active device, battery status, and mode indicators.

Battery Installation

Proper battery installation ensures optimal performance.

Turn remote over and locate battery compartment on back.
Slide compartment cover downward to open.
Insert 2 AA batteries, observing correct polarity (+/-).
Replace cover securely until it clicks into place.

WARNING! Use only fresh batteries. Do not mix old and new batteries. Remove batteries if remote will not be used for extended periods.

Pairing with DIRECTV Receiver

Initial setup and pairing procedure.

Ensure DIRECTV receiver is powered on and functioning.
Press and hold MUTE and SELECT buttons simultaneously for 5 seconds.
Wait for remote's LED to flash green twice.
Enter pairing code 961 using number pad.
Remote will flash green three times to confirm successful pairing.
Test remote functions to verify proper operation.

TIP: If pairing fails, restart both receiver and remote, then repeat process.

Programming for Other Devices

Setting up control for TV, audio system, and other components.

Press and hold the device button (TV, AUDIO, AUX) you want to program.
While holding device button, enter the 5-digit code for your brand.
Release device button when LED flashes twice.
Test power and volume controls to confirm programming.
If first code doesn't work, try alternate codes for your brand.

Auto-Search Method: If codes are unknown, use auto-search by holding device button and POWER until device turns off.

Advanced Features

Utilizing the remote's advanced capabilities.

Macro Programming: Record sequences of up to 20 commands on single button
Backlight Control: Press backlight button to illuminate keys for 10 seconds
RF Mode: Operates through walls and cabinets up to 100 feet
Multi-Room Control: Control multiple receivers in different rooms
Favorite Channels: Program quick-access channel buttons

Voice Control Setup

Configuring and using voice commands.

Ensure remote is paired with compatible DIRECTV receiver.
Press and hold voice control button (side microphone icon).
Wait for voice prompt tone, then speak command clearly.
Common commands: "Channel 205", "Find comedy movies", "Record this show"
Release button when finished speaking.

NOTE: Voice control requires internet connection for full functionality.

Care & Maintenance

Proper care ensures long remote life.

Clean with dry, soft cloth only
Do not use liquids or chemical cleaners
Keep away from extreme temperatures and moisture
Replace batteries every 6-12 months or when performance decreases
Store in dry location when not in use

CAUTION! Do not disassemble remote. No user-serviceable parts inside.

Regulatory Information

FCC ID: A3LRCR66RX. This device complies with Part 15 of FCC Rules. Operation subject to: (1) device may not cause harmful interference, (2) device must accept any interference received. Changes not approved by DIRECTV may void user authority to operate equipment. Manufactured for DIRECTV, LLC. For support: 1-800-531-5000 or directv.com/remotehelp.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote not responding	Dead batteries/Pairing lost	Replace batteries; re-pair with receiver
Buttons not working	Wrong device mode	Press correct device button (TV, AUDIO, etc.)
Intermittent operation	Low battery/Interference	Replace batteries; move closer to receiver
Voice control not working	Network/Microphone	Check internet connection; clean microphone area
Backlight not working	Settings/Battery	Check backlight timeout settings; replace batteries

Reset: Remove batteries, press all buttons for 30 seconds, reinstall batteries.

Service: 1-800-531-5000; directv.com/remotehelp