DIRECTV Remote Manual RC64

The DIRECTV RC64 remote control is a universal remote designed for use with DIRECTV receivers and other home entertainment devices. It features backlit buttons, RF capability for controlling devices without line-of-sight, programmable functions for multiple devices, and dedicated buttons for DIRECTV services. Below are key sections for features, setup, programming, operation, and troubleshooting.

Features at a Glance

Key components: Backlit buttons, RF capability, DIRECTV service buttons, universal device control, LCD display, battery compartment.

Feature	Description
Backlit buttons	Illuminated keys for low-light viewing
RF capability	Controls devices without direct line-of-sight
LCD display	Shows device mode and status information
Battery compartment	Holds 2 AA batteries for power
Device buttons	TV, AUX, DVD, and other device selection
Dedicated DIRECTV buttons	GUIDE, LIST, INFO, DVR functions
Navigation pad	Directional control for menu navigation
Number pad	0-9 for channel selection and data entry
Volume controls	VOL +/- for audio adjustment
MUTE	Mutes audio output

Setup and Installation

Unpack and inspect contents. Install batteries and pair with DIRECTV receiver.

1. Install batteries: Open battery compartment, insert 2 AA batteries observing polarity.
2. Pair with receiver: Press and hold MUTE and SELECT until green light flashes twice.
3. Test remote: Press POWER to ensure receiver responds.
4. Program additional devices: Follow programming instructions for TV, DVD, etc.

WARNING! Use correct battery type; do not mix old and new batteries. Keep away from moisture.

Programming the Remote

Program remote to control other devices like TV, DVD player, or audio system.

1. Press and hold MUTE and SELECT until green light flashes twice.
2. Enter device code using number pad (see code list in manual).
3. Press POWER to test; if device turns off, programming is successful.
4. Repeat for additional devices using corresponding device buttons.

CAUTION! Ensure devices are powered on during programming. Keep remote pointed at device.

Specifications

• Power Source: 2 AA batteries
• Battery Life: Approximately 6 months with typical use
• Transmission: IR and RF capability
• Range: Up to 30 feet with RF, 20 feet with IR
• Compatibility: DIRECTV receivers, most TV brands, DVD players, audio systems
• Buttons: Backlit with tactile feedback
• Dimensions: Standard remote size for comfortable handling
• Weight: Lightweight with battery installed

Button Functions

Primary button functions for DIRECTV operation and device control.

DIRECTV Functions: GUIDE (program guide), LIST (recorded shows), INFO (program information), DVR (recorded program access), MENU (system menu).

Navigation: Arrow buttons for menu navigation, SELECT for menu confirmation, EXIT to return to previous screen.

Device Control: TV, AUX, DVD buttons to switch between programmed devices, VOLUME +/- for audio control, MUTE for instant silence.

Playback: PLAY, PAUSE, STOP, REW, FF, RECORD for DVR and DVD control.

Controlling Multiple Devices

Use device buttons to control up to 4 different entertainment components.

1. Press TV button to control television functions (power, volume, input).
2. Press DVD button to control DVD player functions (play, stop, menu).
3. Press AUX button for additional devices like soundbar or gaming console.
4. Use number pad for direct channel access on TV or receiver.

Tip: Program each device separately using manufacturer codes for optimal performance.

Advanced Features

RF mode for controlling devices through walls or cabinets. Backlight for low-light use.

1. RF Mode: Enables control without direct line-of-sight to receiver.
2. Backlight: Press any button to illuminate keys for 10 seconds in dark environments.
3. Macro Programming: Program sequences of commands for one-button operation.
4. Factory Reset: Hold MUTE and SELECT for 15 seconds to restore default settings.

Note: RF mode requires compatible DIRECTV receiver with RF capability.

Battery Information

Uses 2 AA batteries. Typical battery life: 6 months with normal use.

Battery Replacement:

1. Slide open battery compartment on back of remote.
2. Remove old batteries observing polarity markings.
3. Insert new AA batteries with correct orientation.
4. Close compartment until it clicks shut.

CAUTION! Use alkaline batteries only. Do not recharge non-rechargeable batteries.

Care & Maintenance

Clean with dry cloth only. Avoid liquids and extreme temperatures.

Cleaning Instructions:

1. Remove batteries before cleaning.
2. Use slightly damp cloth for stubborn stains.
3. Dry completely before replacing batteries.
4. Store in dry location away from heat sources.

WARNING! Do not submerge in water. Avoid abrasive cleaners.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. This device complies with part 15 of the FCC Rules. Copyright © DIRECTV. For support, visit www.directv.com/remote or contact 1-800-531-5000.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote not working	Dead batteries or pairing issue	Replace batteries; re-pair with receiver
Buttons not responding	Battery corrosion or damage	Clean battery contacts; check for physical damage
Cannot control TV volume	Incorrect programming	Reprogram TV codes; ensure correct device mode
Backlight not working	Low batteries or setting	Replace batteries; check backlight timeout setting
RF mode not functioning	Receiver compatibility	Ensure receiver supports RF; check pairing

Reset: Hold MUTE and SELECT for 15 seconds to factory reset.

Service: 1-800-531-5000; www.directv.com/support