The DIRECTV Slimline 3 is a high-performance satellite dish antenna designed for receiving DIRECTV HD and SD programming. This manual covers installation, alignment, connection procedures, and troubleshooting for optimal signal reception. The Slimline 3 supports 3-LNB technology for receiving signals from multiple orbital locations.
Ensure all components are present before beginning installation.
| Component | Quantity | Description |
|---|---|---|
| Slimline 3 Dish | 1 | Main satellite antenna assembly |
| Mounting Mast | 1 | Dish support pole |
| 3-LNB Assembly | 1 | Triple low-noise block downconverter |
| Mounting Hardware | 1 set | Bolts, nuts, and brackets |
| RG-6 Cable | As specified | Coaxial cable for signal transmission |
| Signal Meter | 1 | For dish alignment (if included) |
| Instruction Manual | 1 | This installation guide |
Proper installation requires clear line of sight to southern sky and secure mounting.
WARNING! Working at heights requires proper safety equipment. Use extreme caution when installing on roofs.
Select stable mounting surface that can support dish in high winds.
CAUTION! Mast must be perfectly plumb for proper signal acquisition.
Proper alignment is critical for optimal signal reception.
Tip: Use DIRECTV's satellite pointing app for precise alignment coordinates.
Proper cabling ensures signal integrity and system performance.
| Connection | Type | Purpose |
|---|---|---|
| LNB to Splitter | RG-6 coaxial | Signal transmission from dish |
| Splitter to Receivers | RG-6 coaxial | Distribution to multiple receivers |
| Ground Block | Coaxial with ground wire | Lightning protection and safety |
| Receiver to TV | HDMI/Component | Video and audio output |
WARNING! All outdoor coaxial connections must be weather-sealed with coaxial sealant.
Complete receiver configuration for service activation.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| No signal | Dish misalignment | Re-align dish; check for obstructions |
| Weak signal | Loose connections | Tighten all connectors; check cable integrity |
| Pixelation | Signal interference | Check for tree growth; reposition dish |
| Receiver not detecting dish | LNB failure | Test LNB; replace if necessary |
| Some channels missing | Partial obstruction | Check alignment on all three satellites |
Reset: Receiver menu > Settings > Reset > Repeat Satellite Setup
Follow all safety precautions during installation and maintenance.
WARNING! Never install during lightning storms or adverse weather conditions.