DIRECTV WVBR0-25 Manual

The DIRECTV WVBR0-25 is a wireless video bridge receiver designed to extend DIRECTV Genie Mini client functionality wirelessly throughout your home. It connects to your Genie HD DVR system to stream live TV, recorded shows, and on-demand content to additional TVs without the need for coaxial cable runs. Below are key sections for setup, features, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Connections 6. Connecting to TV 7. Operation Guide 8. Network Settings 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Wireless Video Bridge Receiver, Power Adapter, HDMI Cable, Remote Control, Ethernet Port, Status LED.

Feature	Description
Wireless Connectivity	Connects to Genie system via 5GHz wireless band
HDMI Output	For high-definition video and audio to TV
Ethernet Port	For wired network connection if needed
Status LED	Indicates power, network, and connection status
Power Adapter	12V DC power input
IR Blaster	For remote control signal transmission
Pairing Button	For wireless setup with Genie server
Reset Button	Factory reset functionality
USB Port	For future updates and services
Audio Output	Digital audio output capability

Installation

Unpack and inspect contents. Place near TV with good ventilation.

Connect to TV: Use HDMI cable from WVBR0-25 to TV HDMI input.
Connect power: Plug power adapter into WVBR0-25 and wall outlet.
Position antenna: Ensure clear line of sight to Genie server for best signal.
Network connection: Connect Ethernet cable if using wired network.

WARNING! Keep unit away from heat sources and ensure proper ventilation. Do not block vents.

First-Time Setup

Power on unit; follow on-screen prompts for wireless pairing.

Power up: Connect power adapter; status LED should blink blue.
Pair with Genie: Press pairing button; follow on-screen instructions on TV.
Select input: Set TV to correct HDMI input source.
Network setup: Configure wireless or wired network connection.
Activation: Complete activation with DIRECTV service.

CAUTION! Ensure Genie server is powered on and within range during pairing process.

Specifications

Model: WVBR0-25 Wireless Video Bridge Receiver
Wireless: 5GHz band, 802.11ac compatible
Video Output: HDMI up to 1080p resolution
Audio: Dolby Digital, stereo output
Networking: Ethernet 10/100, Wireless 5GHz
Power: 12V DC, 1.5A power adapter
Operating Range: Up to 50 feet from Genie server
Dimensions: 5.5" x 5.5" x 1.5"
Weight: 1.2 lbs
Operating Temp: 32°F to 104°F (0°C to 40°C)

Controls and Connections

Front Panel: Status LED (Power/Network/Activity). Rear Panel: HDMI Out, Ethernet, USB, Power Input, Reset Button.

Status LED Indicators: Solid Blue - Normal operation; Blinking Blue - Pairing mode; Solid Red - Error; Off - No power.

Remote Control: POWER, MENU, GUIDE, DVR, INFO, directional pad, SELECT, EXIT, numeric keys, volume controls.

Connecting to TV

HDMI: Primary connection for video/audio. Alternative: Component/composite via adapter if needed.

Turn off TV and WVBR0-25 before connecting.
Connect HDMI cable from WVBR0-25 to TV HDMI port.
Power on WVBR0-25, then power on TV.
Select corresponding HDMI input on TV.

Tip: Use high-speed HDMI cable for best performance. Ensure TV supports HDCP.

Operation Guide

Access full DIRECTV Genie Mini functionality wirelessly.

Power on: Press POWER on remote or front panel.
Navigate: Use directional pad and SELECT for menu navigation.
Live TV: Watch live programming from Genie server.
Recorded shows: Access DVR recordings from main Genie.
On-demand: Browse and watch on-demand content.
Guide: Press GUIDE for program guide.
Info: Press INFO for program information.
Menu: Press MENU for system settings and options.

WARNING! Do not expose to liquids or extreme temperatures. Keep in well-ventilated area.

Network Settings

Wireless setup: Auto-detects Genie server during pairing. Manual network configuration available in menu.

Network Status: Check connection quality in system information menu. Signal strength indicator shows wireless connection quality.

Care & Maintenance

Unplug before cleaning. Use dry, soft cloth only; no liquids or chemical cleaners.

CAUTION! Do not open casing; no user-serviceable parts inside. Refer servicing to qualified personnel.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © DIRECTV. For support, visit www.directv.com or contact 1-800-531-5000. This device complies with part 15 of the FCC Rules.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No picture on TV	HDMI connection/TV input	Check HDMI cable; ensure TV on correct input; power cycle devices.
No sound	Audio settings/connections	Check TV audio settings; ensure HDMI cable secure; test different audio format.
Wireless connection lost	Distance/obstructions	Move closer to Genie server; reduce obstructions; check for interference.
Remote not working	Batteries/obstacles	Replace batteries; ensure clear path to IR sensor; check remote mode.
Status LED red	Connection/software issue	Power cycle unit; check Genie server status; reset if necessary.
Poor video quality	Weak signal/interference	Reposition unit; check wireless signal strength; reduce interference sources.

Reset: Hold reset button for 10 seconds to factory reset (loses all settings).

Service: 1-800-531-5000; www.directv.com/support